NFS搭建

2018-08-17 09:31:57来源:博客园 阅读 ()

新老客户大回馈,云服务器低至5折

一、环境

nfsserver01:192.168.127.100  centos7.3

nfsclient01:192.168.127.101  centos7.3

二、NFS原理

三、安装测试

1、nfsserver安装

[root@nfsserver01 ~]# yum install rpcbind nfs-utils -y
[root@nfsserver01 ~]# mkdir /Share
[root@nfsserver01 ~]# chmod 755 /Share
[root@nfsserver01 ~]# ll -d /Share
drwxr-xr-x. 2 root root 6 8月  16 10:42 /Share
[root@nfsserver01 ~]# mkdir /Share
[root@nfsserver01 ~]# chmod 755 /Share
[root@nfsserver01 ~]# ll -d /Share
drwxr-xr-x. 2 root root 6 8月  16 10:42 /Share
[root@nfsserver01 ~]# vim /etc/exports

#######shared for test by suffergtf at 2018-8-16######
/Share  192.168.127.0/24(rw,sync)
[root@nfsserver01 ~]# systemctl start rpcbind
[root@nfsserver01 ~]# systemctl enable rpcbind
[root@nfsserver01 ~]# netstat -lntup|grep rpcbind
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      10432/rpcbind       
tcp6       0      0 :::111                  :::*                    LISTEN      10432/rpcbind       
udp        0      0 0.0.0.0:855             0.0.0.0:*                           10432/rpcbind       
udp        0      0 0.0.0.0:111             0.0.0.0:*                           10432/rpcbind       
udp6       0      0 :::855                  :::*                                10432/rpcbind       
udp6       0      0 :::111                  :::*                                10432/rpcbind
[root@nfsserver01 ~]# rpcinfo -p localhost
   program vers proto   port  service
    100000    4   tcp    111  portmapper
    100000    3   tcp    111  portmapper
    100000    2   tcp    111  portmapper
    100000    4   udp    111  portmapper
    100000    3   udp    111  portmapper
    100000    2   udp    111  portmapper

[root@nfsserver01 ~]# systemctl start nfs
[root@nfsserver01 ~]# systemctl enable nfs
Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service.

[root@nfsserver01 ~]# rpcinfo -p localhost
   program vers proto   port  service
    100000    4   tcp    111  portmapper
    100000    3   tcp    111  portmapper
    100000    2   tcp    111  portmapper
    100000    4   udp    111  portmapper
    100000    3   udp    111  portmapper
    100000    2   udp    111  portmapper
    100024    1   udp  40390  status
    100024    1   tcp  56253  status
    100005    1   udp  20048  mountd
    100005    1   tcp  20048  mountd
    100005    2   udp  20048  mountd
    100005    2   tcp  20048  mountd
    100005    3   udp  20048  mountd
    100005    3   tcp  20048  mountd
    100003    3   tcp   2049  nfs
    100003    4   tcp   2049  nfs
    100227    3   tcp   2049  nfs_acl
    100003    3   udp   2049  nfs
    100003    4   udp   2049  nfs
    100227    3   udp   2049  nfs_acl
    100021    1   udp  50142  nlockmgr
    100021    3   udp  50142  nlockmgr
    100021    4   udp  50142  nlockmgr
    100021    1   tcp  32899  nlockmgr
    100021    3   tcp  32899  nlockmgr
    100021    4   tcp  32899  nlockmgr
[root@nfsserver01 ~]# showmount -e localhost
Export list for localhost:
/Share 192.168.127.0/24

2、nfsclient安装

[root@nfsclient01 ~]# yum install rpcbind nfs-utils -y   #nfs-utils可不安装
[root@nfsclient01 ~]# systemctl start rpcbind
[root@nfsclient01 ~]# systemctl enable rpcbind

3、测试连接

[root@nfsclient01 ~]# showmount -e 192.168.127.100
clnt_create: RPC: Port mapper failure - Unable to receive: errno 113 (No route to host)  ##关闭server,client端防火墙和selinux
######nfsserver端
[root@nfsserver01 ~]# systemctl stop firewalld
[root@nfsserver01 ~]# systemctl disable firewalld
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
[root@nfsserver01 ~]# vim /etc/selinux/config


# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected.
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted
######nfsclient端同上

[root@nfsclient01 ~]# showmount -e 192.168.127.100
Export list for 192.168.127.100:
/Share 192.168.127.0/24
[root@nfsclient01 ~]# mount -t nfs 192.168.127.100:/Share /mnt
[root@nfsclient01 mnt]# echo 'mount -t nfs 192.168.127.100:/Share /mnt' >>/etc/profile
[root@nfsclient01 ~]# df -h
文件系统                容量  已用  可用 已用% 挂载点
/dev/sda3                18G  1.2G   17G    7% /
devtmpfs                227M     0  227M    0% /dev
tmpfs                   237M     0  237M    0% /dev/shm
tmpfs                   237M  4.6M  232M    2% /run
tmpfs                   237M     0  237M    0% /sys/fs/cgroup
/dev/sda1                97M   89M  8.6M   92% /boot
tmpfs                    48M     0   48M    0% /run/user/0
192.168.127.100:/Share   18G  1.2G   17G    7% /mnt
[root@nfsclient01 mnt]# touch 1.test
touch: 无法创建"1.test": 权限不够

[root@nfsserver01 ~]# cat /var/lib/nfs/etab     ######查看默认共享参数
/Share    192.168.127.0/24(rw,sync,wdelay,hide,nocrossmnt,secure,root_squash,no_all_squash,no_subtree_check,secure_locks,acl,no_pnfs,anonuid=65534,anongid=65534,sec=sys,secure,root_squash,no_all_squash)
[root@nfsserver01 ~]# ll /Share/ -d
drwxr-xr-x. 2 root root 6 8月  16 10:42 /Share/    ###共享文件属主为root,挂载的客户端root用户,被转换成nfsnobody用户,所以没有权限
[root@nfsserver01 ~]# chown nfsnobody.nfsnobody /Share
[root@nfsserver01 ~]# ll /Share/ -d
drwxr-xr-x. 2 nfsnobody nfsnobody 6 8月  16 10:42 /Share/

[root@nfsclient01 mnt]# touch 1.test
[root@nfsclient01 mnt]# ll /mnt/
总用量 0
-rw-r--r--. 1 nfsnobody nfsnobody 0 8月  16 11:22 1.test

 

标签:

版权申明:本站文章部分自网络,如有侵权,请联系:west999com@outlook.com
特别注意:本站所有转载文章言论不代表本站观点,本站所提供的摄影照片,插画,设计作品,如需使用,请与原作者联系,版权归原作者所有

上一篇:nginx反向代理

下一篇:shell入门基础&常见命令及用法