问：本机ip地址为：127.0.0.1
谢谢啦！
希望未来针对自定义镜像的机器 进行装完自动设置,新装自定义系统需要帮忙辛苦设置一下ip地址
答：您好，
127.0.0.1 网路已经畅通，IP地址已经可以正常SSH远程。
非常感谢您对我司的支持，谢谢！
问：配置的不对，基本网卡应该都修改一下，辛苦帮忙重新修改一下，谢谢啦
答：您好，当前服务器网卡已经为您重新配置，服务器已经可以远程连接，请您重新核实查看,非常感谢您长期对我司的支持!
问：[@ebs-5448]~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 127.0.0.1 netmask 127.0.0.1 broadcast 127.0.0.1
inet6 fe80::215:5dff:fe93:45ad prefixlen 64 scopeid 0x20<link>
ether 00:15:5d:93:45:ad txqueuelen 1000 (Ethernet)
RX packets 32516 bytes (3.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6110 bytes (1.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::5054:ff:fef2:a527 prefixlen 64 scopeid 0x20<link>
ether 52:54:00:f2:a5:27 txqueuelen 1000 (Ethernet)
RX packets 7412 bytes 693099 (676.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 620 (620.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 127.0.0.1
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 12025 bytes 749192 (731.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12025 bytes 749192 (731.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1里面的 内网ip不行。。。辛苦帮忙再看看啊
答：您好，
核实内网IP正常，请查看,非常感谢您长期对我司的支持!
